Chuyên ngành tem nhãnLabel specialist标签专业

Tem nhãn silicone và in dây đai

Silicone labels and tape printing

硅胶标与织带印刷

Làm mẫu và sản xuất tem cho may mặc, giày dép, túi xách, cùng hệ máy K3 nếu xưởng của bạn muốn tự in.

Sampling and production of labels for apparel, footwear and bags, plus the K3 machines if your factory wants to print in-house.

为服装、鞋材、箱包打样与生产标签;如需自产,也可提供 K3 设备。

Tem silicone chuyển nhiệt in lụa nhiều màu
3.000+ m²Nhà xưởngFactory floor厂房面积
11+Dây chuyền in K3K3 printing linesK3 印刷线
100 triệu100 million1 亿Lượt in mỗi năm, tối đaPrints a year, up to年印次,最高
3–5 ngày3–5 days3–5 天Làm mẫu tem in lụaScreen-printed label samples丝印标打样

Số liệu của nhà máy đối tác Huizhou Labelsun, nơi sản xuất tem bằng dây chuyền K3.Figures from our partner factory, Huizhou Labelsun, which produces labels on K3 lines.数据来自合作工厂惠州立标信,其使用 K3 产线生产标签。

Sản phẩmProducts产品

4 loại tem và làm bằng máy nào

Four label types and the machines behind them

四种标签及所用设备

Tem silicone chuyển nhiệt in lụa nổi 3D

Tem silicone in lụa chuyển nhiệtScreen-printed silicone transfer丝印硅胶热转印标

In chồng nhiều lớp silicone để tạo độ nổi, rồi ép nhiệt lên sản phẩm. Mềm, bền màu sau nhiều lần giặt.Silicone is overprinted layer by layer for a raised effect, then heat-pressed on. Soft and colourfast through repeated washing.多层硅胶叠印形成立体效果,再热压到产品上。手感柔软,多次洗涤不褪色。

Công nghệProcess工艺In lụa + ép nhiệtScreen print + heat press丝印 + 热压
Dùng choUsed on应用Quần áo, giày dép, túi xách, đồ gia dụngGarments, footwear, bags, homeware服装、鞋材、箱包、家居
Mẫu / đơn lớnSample / bulk打样 / 大货3–5 ngày / 7–12 ngày3–5 days / 7–12 days3–5 天 / 7–12 天
Làm bằng máy nào?Which machine?用什么设备?Máy in xếp lớp BY-HD5080 hoặc dây chuyền in bàn K3BY-HD5080 stack printer or K3 table lineBY-HD5080 层叠印刷机或 K3 台板印花线Xem máySee the machine查看设备 →
Dây đai dệt in lụa

In lụa dây đai, băng thunRibbon and elastic tape printing织带与松紧带丝印

In logo, họa tiết lên băng dệt. Hình in co giãn theo băng, không nứt hay bong khi kéo, giặt, ủi.Logos and patterns on woven tape. The print stretches with the tape and resists cracking and peeling through washing and ironing.在织带上印制标志与图案。印层随带拉伸,洗涤熨烫不开裂、不脱落。

Mực inInks油墨Silicone, plastisol, gốc nước, ánh kimSilicone, plastisol, water-based, metallic硅胶、塑溶胶、水性、金属
Dùng choUsed on应用Cạp đồ lót, dây áo hoodie, đồ thể thao, ruy băng bao bìWaistbands, hoodie cords, sportswear, packaging ribbon内衣腰带、卫衣抽绳、运动服、包装丝带
Mẫu / đơn lớnSample / bulk打样 / 大货3–5 ngày / 7–12 ngày3–5 days / 7–12 days3–5 天 / 7–12 天
Làm bằng máy nào?Which machine?用什么设备?Máy dệt băng kim để dệt dây, dây chuyền in bàn K3 để inNeedle looms to weave, K3 table line to print针织带机织造,K3 台板印花线印刷Xem máySee the machine查看设备 →
Mẫu tem chuyển nhiệt

Tem silicone đúc khuônMolded silicone transfer模压硅胶转印标

Bơm silicone lỏng vào khuôn kim loại, đóng rắn thành logo nổi sắc nét, rồi ép nhiệt lên vải. Hợp với đồ thể thao và đồ dã ngoại.Liquid silicone is cured in a metal mould into a sharp raised logo, then heat-pressed. Popular for sportswear and outdoor gear.液态硅胶注入金属模具固化成立体标志,再热压到面料上。常用于运动与户外产品。

Vật liệuMaterial材料100% silicone lỏng, không phthalate100% liquid silicone, phthalate-free100% 液态硅胶,不含邻苯
Bề mặtFinish表面Mờ, bóng, trong suốt, nhiều màuMatte, gloss, translucent, multi-colour哑光、亮面、半透明、多色
Mẫu / đơn lớnSample / bulk打样 / 大货5–7 ngày / 10–20 ngày5–7 days / 10–20 days5–7 天 / 10–20 天
Làm bằng máy nào?Which machine?用什么设备?Làm bằng khuôn, không dùng máy in lụa. Nhận đặt hàng theo mẫu.Made by moulding, not screen printing. Available to order.模压工艺,无需丝印机,可按样订购。
Tem chuyển nhiệt có logo Labelsun

Tem TPU/PVC cao tầnHigh-frequency TPU/PVC transfer高频 TPU/PVC 转印标

Ép cao tần tạo vân nổi 3D trên TPU hoặc PVC. Bề mặt gọn, chống nước, không nứt và giữ màu sau nhiều lần giặt.High-frequency embossing gives TPU or PVC a clean 3D texture that is waterproof, crack-resistant and colourfast.高频压花使 TPU 或 PVC 呈现立体纹理,防水、不开裂、耐洗不褪色。

Vật liệuMaterial材料TPU hoặc PVCTPU or PVCTPU 或 PVC
Dùng choUsed on应用Áo thun, áo khoác, đồ bơi, ba lô, giày, đồng phụcT-shirts, jackets, swimwear, backpacks, shoes, uniformsT 恤、夹克、泳衣、背包、鞋、制服
Mẫu / đơn lớnSample / bulk打样 / 大货5–7 ngày / 10–20 ngày5–7 days / 10–20 days5–7 天 / 10–20 天
Làm bằng máy nào?Which machine?用什么设备?Làm bằng máy ép cao tần, không dùng máy in lụa. Nhận đặt hàng theo mẫu.Made by high-frequency press, not screen printing. Available to order.高频压花工艺,无需丝印机,可按样订购。
Từ máy đến temFrom machine to label从设备到标签

Muốn tự in tem silicone, xưởng cần gì?

What does a factory need to print its own silicone labels?

自产硅胶标需要哪些设备?

Nhà máy đối tácPartner factory合作工厂

Chất lượng sản xuất

Production quality

生产品质

1Chế bản tại xưởngIn-house screens自有制版Tự phủ keo, căng lưới, ghi bản CTS và rửa bản, nên khung lưới đồng đều từ đầu.Coating, stretching, CTS imaging and washing all in-house, for consistent screens.涂布、拉网、CTS 制版与冲洗均在厂内完成,网版品质一致。
2In trên dây chuyền K3Printed on K3 linesK3 产线印刷Hơn 11 dây chuyền, tối đa 100 triệu lượt in mỗi năm. Máy K3 chồng lớp chính xác ±0,02 mm.11+ lines, up to 100 million prints a year. K3 machines register to ±0.02 mm.11 条以上产线,年印次最高 1 亿。K3 设备套印精度 ±0.02 mm。
3Bền khi sử dụngBuilt to last经久耐用Tem mềm, đàn hồi cao, giữ màu và độ bám sau nhiều lần giặt.Soft, highly elastic labels that keep colour and grip through repeated washing.柔软高弹,多次洗涤后仍保持色彩与附着力。
4Vật liệu an toànSafe materials安全材料Vật liệu theo yêu cầu REACH, nhà máy có báo cáo đánh giá SMETA.Materials to REACH requirements, with a SMETA audit report for the factory.材料符合 REACH 要求,工厂持有 SMETA 审核报告。
±0,02 mm±0.02 mm±0.02 mmSai số chồng lớpRegistration套印精度
0,1–2,8 mm0.1–2.8 mm0.1–2.8 mmĐộ dày lớp inInk thickness墨层厚度
200200200Tấm in trong kho tầngPallets in storage料库承印板
300 lần/giờ300 prints/h300 次/时Gạt 2 lượt, đo thực tếTwo strokes, measured刮两刀,实测
32 m²32 m²32 m²Diện tích đặt máyFloor space占地面积
20 giờ20 hours20 小时800 thân giày × 30 lớp800 uppers × 30 layers800 片鞋面 × 30 层

Chế bản

Screen making

制版

Khung lưới quyết định độ nét, nên mọi bước đều được tự động hóa.

The screen sets print sharpness, so every step is automated.

网版决定清晰度,每一步均自动化。

Căng lướiStretching拉网Lực căng ±0,5 N, dưới 10 phút/khung, khung tới 1500 × 3000 mm±0.5 N, under 10 min per frame, frames up to 1500 × 3000 mm张力 ±0.5 N,每框不足 10 分钟,最大 1500 × 3000 mm
Tráng keoCoating涂布0–999 lượt, tốc độ 10–200 mm/s0–999 passes at 10–200 mm/s0–999 次,速度 10–200 mm/s
Ghi bản CTSCTS imagingCTS 制版Tới 12700 dpi, laser UV 405 nm, không cần phimUp to 12700 dpi, 405 nm UV laser, no film最高 12700 dpi,405 nm 紫外激光,无需菲林
Rửa khungWashing冲洗Phun cao áp HPS, khung tới 1200 × 1500 mmHPS high-pressure spray, frames up to 1200 × 1500 mmHPS 高压喷淋,最大 1200 × 1500 mm
Căng lướiStretching拉网
Tráng keoCoating涂布
Ghi bản CTSCTS imagingCTS 制版
Hiện ảnh, rửa khungDeveloping, washing显影冲洗

Trạm in

Print station

印刷工位

Một khung lưới và một dao gạt in chồng nhiều lần, nên các lớp trùng khít nhau.

One screen and one squeegee overprint repeatedly, so layers stay aligned.

同一网版与刮刀反复叠印,层层精准对位。

Màu inColours颜色Không giới hạn, đổi khung lưới là đổi màuUnlimited, change the screen to change colour不限,换网版即换色
Tốc độ theo catalogueCatalogue speed样本速度450–600 lần in/giờ450–600 prints/h450–600 次/时
Tốc độ đo thực tếMeasured speed实测速度300 lần/giờ gạt 2 lượt, 500 lần/giờ gạt 1 lượt300 prints/h at two strokes, 500 at one刮两刀 300 次/时,刮一刀 500 次/时
Dao gạtSqueegee刮刀Cao su PU, Shore A 45–95°PU blade, Shore A 45–95°PU 胶条,邵氏 A 45–95°
Khung lưới và mực siliconeScreen and silicone ink网版与硅胶墨
Đầu in và dao gạtPrint head and squeegee印头与刮刀
Định vị trên băng chuyềnPositioning on the conveyor传送定位
Trạm in và màn hình điều khiểnStation and control screen工位与控制屏

Kho tầng, robot và làm khô

Storage, robot and drying

料库、机械手与干燥

Robot đưa từng tấm đi in rồi trả về giá, không cần lò sấy dài và ít bám bụi.

A robot takes each pallet to print and back, with no long oven and less dust.

机械手逐板送印并送回料架,无需长烘道,减少粉尘。

Kho chứaStorage料库200 tấm, 4 khu nạp và xuất linh hoạt200 pallets, four interchangeable load and unload zones200 块,四区可灵活上下料
Không khíAir空气Có hộp lọc và vùng khô ổn định nhiệtFilter units and a temperature-controlled drying area配空气净化与恒温表干区
Tấm inPallets承印板Hợp kim nhôm, mỗi tấm 2 đôi mũ giàyAluminium alloy, two pairs of uppers per pallet铝合金,每板 2 双鞋面
Kích thướcSize尺寸8860 × 3620 × 2100 mm8860 × 3620 × 2100 mm8860 × 3620 × 2100 mm
Kho nhiều tầng 4 khuFour-zone stacked storage四区层叠料库
Tay robot tải nặngHeavy-duty robot arm重载机械手
Băng chuyền đưa vào trạm inConveyor to the station传送至工位
Tự trả về giá để khô bề mặtReturned to the rack to dry自动回架表干

Ví dụ sản xuất thực tế

A real production case

实际生产案例

Thân giày 3D cần in chồng 30 lần, một máy làm xong trong khoảng một ngày.

A 3D upper needs 30 overprints, and one machine finishes the job in about a day.

3D 鞋面需叠印 30 次,一台设备约一天完成。

Số lượngQuantity数量200 tấm × 4 thân giày = 800 thân giày200 pallets × 4 uppers = 800 uppers200 板 × 4 片 = 800 片鞋面
Số lần inPrints印次200 tấm × 30 lớp = 6.000 lần200 pallets × 30 layers = 6,000 prints200 板 × 30 层 = 6000 次
Thời gianTime时间6.000 ÷ 300 lần/giờ = 20 giờ6,000 ÷ 300 prints/h = 20 hours6000 ÷ 300 次/时 = 20 小时
So với bàn in dàiAgainst a long table对比长台板Thay bàn 50 m bằng máy chiếm 32 m²Replaces a 50 m table with a 32 m² machine以 32 m² 设备替代 50 m 长台板
200 tấm, 800 thân giày200 pallets, 800 uppers200 板,800 片鞋面
Mẫu thân giày 3D3D upper sample3D 鞋面样品
Silicone nổi nhiều màuRaised multi-colour silicone多色立体硅胶
Bản vẽ kích thước máyMachine dimensions设备尺寸图

Số liệu máy: catalogue K3 và video giới thiệu BY-HD5080 của K3 Boyan × Infinite Creation.Machine data: K3 catalogue and the K3 Boyan × Infinite Creation BY-HD5080 video.设备数据:K3 样本及 K3 博研 × Infinite Creation 的 BY-HD5080 视频。

Dây chuyền in lụa tại xưởng LabelsunTem silicone K3 in nổi

Gửi logo, nhận tư vấn loại tem phù hợp

Send your logo for label advice

发送标志,获取标签建议

Hotline/Zalo: +84 962 457 770

Hotline/Zalo: +84 962 457 770

热线/Zalo:+84 962 457 770

Chat ZaloChat on ZaloZalo 咨询

Thông tin và hình ảnh sản phẩm:Product information and images:产品信息与图片: Huizhou Labelsun.